Solved: Connectig an AP1131 act as WGB to AP root with two VLANS and two SSIDs

e.bayon · ‎03-31-2008

Someone Knows, if I can connect an AP 1131 configured as WGB to other AP 1131 acting as root with 2 Vlans and 2 SSIDs, and pass all of them to the WGB ethernet port, a mean, passing the traffic from the 2 differents VLANs with two differnts IP range from the ethernet AP root port, to the ethernet WGB port.

Thanks.

mirek.tichy_2 · ‎03-31-2008

Unfortunately it will not play. AP as a WGB can cary only one (native) VLAN. For interconnecting more VLANs you need a full wireless bridge but it cannot be AP11xx.

View solution in original post

mirek.tichy_2 · ‎03-31-2008

Unfortunately it will not play. AP as a WGB can cary only one (native) VLAN. For interconnecting more VLANs you need a full wireless bridge but it cannot be AP11xx.

e.bayon · ‎04-02-2008

And what about using AP1242AG in the same scenery?

It could be fine, if configure them as Bridge?

Regards