Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1937
Views
2
Helpful
4
Replies

q-in-q router 0x8100

erlangm
Level 1
Level 1

‎03-31-2008 05:32 PM

Hi

I would like use the ethertype 0x8100 for the s-vlan tag.

i am using an 3845 Router.

example:

interface gig0/1

..

interface gig0/1.1

ip address x.x.x.x x.x.x.x

encapsulation dot1Q 500 second-dot1q 100

because its not possible to enter at the main-interface the command:

"dot1q tunneling ethertype 0x8100"

only ethertype 0x88a8 and 0x9100 is allowed!

so i ommited this command!

does this config work?

and which ethertype uses the router?

thanks

Labels:
0 Helpful
4 Replies 4

ivillegas
Level 6
Level 6

‎04-04-2008 01:42 PM

I have seen this command work with Cisco IOS XR software. http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/qinq.html

erlangm
Level 1
Level 1
In response to ivillegas

‎04-10-2008 12:29 AM

thats right!

but the XR-Software isn't working with 3845 Router!

0 Helpful

Pavel Bykov
Level 5
Level 5

‎04-10-2008 04:52 AM

By default Cisco uses 0x8100, which IANA assigned to 802.1Q.

0x88a8 and 0x9100 are not assigned by IANA.

See: http://www.iana.org/assignments/ethernet-numbers

Hope this helps.

0 Helpful

erlangm
Level 1
Level 1
In response to Pavel Bykov

‎04-15-2008 01:26 AM

Hi

with infistream i could intercept the frames, which the router is sending into the lan.

so i can see now, that the frames are really double-tagged with ethertype 0x8100.

thanks

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents