Has anybody used NIL for the CCENT Lab Training.

Unanswered Question
Apr 1st, 2008

Hi there, just looking for some advice regarding the NIL labs i've been reading about - http://www.nil.com/C1256F620032CACB/NILLookup/LB_RL_CCENT?Open&dm=&s=0&rid=C1256F0A00429755.

I'm on the last chapter of my CCENT Cisco Press book and want some decent training materials for some hands on experience. I've done the labs in the cisco prep centre with out any problems! I was thinking of purchasing some kit from ebay for £300 until i saw the NIL remote labs. The CCENT NIL lab covers the list below and it looks interesting, has anybody used these materials?



Use Telnet and WireShark packet sniffer applications

Use the ipconfig, ping, arp commands

Restart the switch and verify the initial configuration messages

Complete the initial device setup on the Catalyst 2950 switch

Secure the access to the switch

Start the Cisco router and verify the startup messages

Use setup to configure the minimum parameters for router operation

Secure the access to the router

Explore context-sensitive help on a Cisco router

Edit incorrect commands in the router CLI

Examine the router status using the show commands

Modify a running and startup router configuration

Use Cisco Security and Device Manager (SDM) to configure DHCP functionality and Internet connectivity

Configure a serial interface on the router

Conect router to multiple locations

Configure static and dynamic routing

Use CDP to discover the local workgroup network from the switch and router

Determine the storage location of the Cisco IOS image

Copy a configuration from a TFTP server to the startup configuration on a Cisco router

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion