massimiliano.se... Tue, 04/01/2008 - 03:03
User Badges:
  • Silver, 250 points or more

Hi,


"The show processes cpu history command displays in ASCII graphical form the total CPU usage on the router over a period of time: one minute, one hour, and 72 hours, displayed in increments of one second, one minute, and one hour, respectively. Maximum usage is measured and recorded every second; average usage is calculated on periods over one second."


Reference: http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_tech_note09186a00800a65d0.shtml#showprochistory


Massimiliano.

guruprasadr Tue, 04/01/2008 - 03:05
User Badges:
  • Gold, 750 points or more

HI, [PLs Rate if HELPS]


The show processes cpu history command displays in ASCII graphical form the total CPU usage on the router over a period of time: one minute, one hour, and 72 hours, displayed in increments of one second, one minute, and one hour, respectively. Maximum usage is measured and recorded every second; average usage is calculated on periods over one second.


You can execute:


router#show processes cpu sorted 1min


Display top-10 CPU-intensive processes on a router ...


Pls Rate if hELPS


Best Regards,


Guru Prasad R

mohammedmahmoud Tue, 04/01/2008 - 03:28
User Badges:
  • Green, 3000 points or more

Hi,


To add a very small detail, the 'show process cpu history' command is available in IOS 12.2 and higher.


BR,

Mohammed Mahmoud.


Actions

This Discussion