UC520 CCME CUE transfer to VM

Unanswered Question
Apr 1st, 2008
User Badges:

How do I configure CUE/CCME to transfer directly to a user mailbox?

If the operator answers and does not want to transfer to user just to mailbox?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Tue, 04/01/2008 - 08:18
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

One way is with the monitor or shared lines to the operator. This way, operator answers from the shared line or transfers to it.

The when transferring again to CUE, the call would go directly to the right mailbox.

Kenneth Mohammed Tue, 04/01/2008 - 08:21
User Badges:
  • Silver, 250 points or more

Ok...here is an example:

1. Make an ephone-dn

ephone-dn 49

number 8....

description ***Express Messaging***

call-forward all [VM Pilot]

2. Then in the CUE, you need to make the E164 phone numbers with the same preceding digit (8 in this case)in front of the extension..example:

username user1 phonenumbere164 81001

so when the receptionist wants to send a caller directly to voicemail, she will transfer the call to 8.... (4 digit extension)

Hope this helps..I know its not the clearest explanation, but it should work.

Rob Huffman Tue, 04/01/2008 - 08:23
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Andy,

Just to add a note to the good thought from Paolo. Here is another method, the steps required are nicely detailed in this good Tech Note;

Transfer a Caller Directly into a Unity Express Mailbox


Hope this helps!



This Discussion