cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
438
Views
0
Helpful
1
Replies

Local authentication and authorization

pnicolette
Level 1
Level 1

On a 2960 with 12.2(44)SE, I'm trying to have user "zero" connect via ssh and be able to run level 0 commands, plus show commands, minus "enable". After login, I get "% Authorization failed" and am bounced out. User "admin" should connect at level one and must use "enable" to reach level 15.

What am I missing?

-------------------

username admin secret ***

username zero privilege 0 secret ***

aaa new-model

aaa authentication login default local

aaa authorization exec default local

...

privilege exec level 1 enable

privilege exec level 0 show all

Thanks for your thoughts!

Paul

1 Reply 1

Jagdeep Gambhir
Level 10
Level 10

Paul,

Config looks ok to me. Check this link and try reconfiguring it,

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml

Regards,

~JG

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: