Will this work?

Answered Question
Apr 1st, 2008

I have a 1100 series AP on my LAN. I have a 2511 access server on the other side of my house that is isolated from my LAN. I want to connect the 2511's ethernet port to a 350 AP in hopes that I can now access the 2511 from my LAN.

I am guessing that if I configure the same SSID and Encrytion along with IPs that are valid on my LAN subnet that it will work.

Am I wrong?

Thank you!

I have this problem too.
0 votes
Correct Answer by Scott Fella about 8 years 8 months ago

This should help. You need a WGB or a wireless bridge that connects to a hub/switch.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml#configure2

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Scott Fella Tue, 04/01/2008 - 15:15

It should.... I used a wireless bridge to connect to my lab that I stuck in a closet:)

cventicinque Wed, 04/02/2008 - 09:15

Thank you very much.

Can anyone else please confirm if this will work.

I appreciate it!

Scott Fella Thu, 04/03/2008 - 18:27

It doesn't matter what AP you have, it matters if the WGB does what you want it to do. If your 350 is a WGB, then you are in luck....

cventicinque Thu, 04/03/2008 - 19:57

It looks like I will have to do some role reversal for my APs per this info:

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q21

Q. What Autonomous IOS APs can act as a WGB?

A. The AP1100, AP1130, AP200, AP1240, and BR1310 all support WGB mode of operation. The AP350 and the BR1400 do not support WGB.

Sort of a bummer that I will have to downgrade my LAN from 54M to 11M but, I guess I can deal with it until I find a cheap 1100.

Thanks again!

Actions

This Discussion