rebooting all 7941s

Answered Question
Apr 1st, 2008

Hi experts,


Is there a way to reboot thru Call Manager or other to reboot only those 7941 phones? We just upgraded the firmware.


Tnx

Correct Answer by Rob Huffman about 8 years 10 months ago

Hi Robert,


Sure, via ccmadmin if you go to Device>Phone>Search by Device Type>7941 and all the 7941's will be available (check 50 per page). Then Select-All checkbox and reset. You just go page by page and reset all 50.


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 04/01/2008 - 17:01

Hi Robert,


Sure, via ccmadmin if you go to Device>Phone>Search by Device Type>7941 and all the 7941's will be available (check 50 per page). Then Select-All checkbox and reset. You just go page by page and reset all 50.


Hope this helps!

Rob

Eric Krieger Wed, 04/02/2008 - 00:39

In addition to the solution Rob gave you, you might want to use BAT if you want to reboot an hugh amount of Phones (Update Phones -> search by Device Type -> select "reset phones" -> press update).


Remember though that the Communications Manager (CallManager) throttles the number of TFTP requests to control/reduce the load.


Regards,


Eric

Actions

This Discussion