Solved: rebooting all 7941s

redrobish · ‎04-01-2008

Hi experts,

Is there a way to reboot thru Call Manager or other to reboot only those 7941 phones? We just upgraded the firmware.

Tnx

Rob Huffman · ‎04-01-2008

Hi Robert,

Sure, via ccmadmin if you go to Device>Phone>Search by Device Type>7941 and all the 7941's will be available (check 50 per page). Then Select-All checkbox and reset. You just go page by page and reset all 50.

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎04-01-2008

Hi Robert,

Sure, via ccmadmin if you go to Device>Phone>Search by Device Type>7941 and all the 7941's will be available (check 50 per page). Then Select-All checkbox and reset. You just go page by page and reset all 50.

Hope this helps!

Rob

Eric Krieger · ‎04-02-2008

In addition to the solution Rob gave you, you might want to use BAT if you want to reboot an hugh amount of Phones (Update Phones -> search by Device Type -> select "reset phones" -> press update).

Remember though that the Communications Manager (CallManager) throttles the number of TFTP requests to control/reduce the load.

Regards,

Eric