04-02-2008 10:42 AM - edited 03-15-2019 09:48 AM
Hi,
has anyone a full configuration steps on the Voice gateway and on the CCM part for transcoding on NM-HDV.
i know for PVDM2 i configure mtpmac but in NM-HDV !!!!
Good day
Solved! Go to Solution.
04-02-2008 10:59 AM
this what u looking for?
CallManager and IOS Gateway DSP Farm Configuration Example
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_configuration_example09186a0080334294.shtml
HTH
javalenc
if this helps, please rate
View solution in original post
04-02-2008 10:48 AM
DSP-Farm Services on the NM-HDV: Example
http://www.cisco.com/en/US/partner/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1028744
04-02-2008 10:55 AM
HI,
i have read this part earlier, but how to configure it from the ccm side.
dspfarm transcoder maximum sessions 2 for instance
should i used mtpmac as well?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
