Concentrator 3005 L2L Filters

TODD BERGMAN · ‎04-02-2008

Anyone have a step by step on creating rules->filters->applying to and IPsec L2L tunnel in the 3005 concentrator. I created rules, trying to assign rules to filters and SA to the rules in that filter and recieve the following error.

"SA is part of an IPSec LAN-to-LAN connection,and cannot be added to a rule."

What am I suppose to do? I added the filter to the user group L2L.

Any info would be great. I read through the Cisco Configuration Reference guide but this isn't making sense.

mchin345 · ‎04-08-2008

you simply need to reapply the L2L settings and Reboot after making changes to fliter on external interface .

TODD BERGMAN · ‎04-08-2008

So I just modify the 2 rules on the external interface (Default) filter and add whatever else i want? Reboot the concentrator to make the changes go into effect?

Reboot is going to be harsh.

sundar.palaniappan · ‎04-08-2008

Have a look at this example that's goes through the motion of creating rules, applying the rules to the filter and SA setup etc.

http://www.cisco.com/warp/public/471/ALTIGA_pix.html

HTH

Sundar