CallerID problem from PSTN(FXO)

Answered Question
Apr 2nd, 2008

Hi,

I have a very strange problem with callerID from my PSTN.

The lines from the PSTN is connected to a vic2-4fxo card with NM-HD-2VE.

I used MGCP for CCM.

PSTN has callerID enabled.

But the line is placed on the fxo, it does not display on the IP phones.

When I connected PSTN line to a analog phone, I get callerID displayed on the the analog phone.

I have this problem too.
0 votes
Correct Answer by Jaime Valencia about 8 years 9 months ago

caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323

HTH

javalenc

if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Wed, 04/02/2008 - 22:10

caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323

HTH

javalenc

if this helps, please rate

Actions

This Discussion