04-02-2008 09:19 PM - edited 03-15-2019 09:49 AM
Hi,
I have a very strange problem with callerID from my PSTN.
The lines from the PSTN is connected to a vic2-4fxo card with NM-HD-2VE.
I used MGCP for CCM.
PSTN has callerID enabled.
But the line is placed on the fxo, it does not display on the IP phones.
When I connected PSTN line to a analog phone, I get callerID displayed on the the analog phone.
Solved! Go to Solution.
04-02-2008 10:10 PM
caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323
HTH
javalenc
if this helps, please rate
04-02-2008 10:10 PM
caller ID on FXO is not supported using MGCP, if you want called ID you need to switch to H323
HTH
javalenc
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide