IPSEC b/w ASA and Router --- with nat stuff

Unanswered Question
Apr 3rd, 2008

I need help regarding the following issue..

An asa is connected to a router which is connected to the internet.

A vpn must be established b/w ASA and a router that is over internet . The ASA is not directly connected to the internet. It is connected to a router which nat the Asa outside ip to a static global IP .

All i need to know is that do need any special configs for this . or its the same as if ASA would have been directly connected to the internet

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smalkeric Wed, 04/09/2008 - 07:30

In order to configure a LAN-to-LAN tunnel between a Cisco IOS? router and an Adaptive Security Appliance (ASA), these configurations are required on the ASA:

Configure the crypto ipsec command in Phase 2.

Configure the isakmp policy command.

Configure the nat 0 command and the access-list command in order to bypass NATting.

Configure the crypto-map command.

Configure the tunnel-group DefaultL2LGroup command with group information

Actions

This Discussion