04-03-2008 06:18 AM - edited 03-09-2019 08:26 PM
Hi,
I have a problem when trying to connect with Anyconnect client to my ASA v8.0.
I get the error : Unable to verify routing tables modifications...
On the ASA : SVC Message : 17/ERROR Unable to verify routing tables modifications...
Could someone help me for this problem ?
I use Windows XP 32bits with IE7 or IE6.
Thanks
04-09-2008 09:21 AM
Use the command clear route in order to clear the dynamically learned routes and allow sometime to learn the routes once again. It might be resolve your issue.
04-09-2008 11:53 PM
Hi,
I even rebooted the Asa, it didn't fix the issue. The most funny is that under Mac OS X, the anyconnect clien tworks like a charm... I have this problem only with Windows client (I've tried on more than 3 differents PC...)
06-02-2008 12:47 PM
For me, it is the MAC OS X anyconnect client that does not work. It connects for about a minute and then it disconnects and it says re-connecting but never comes back.
The windows version just works.
Anyone any ideas?
Thanks,
Eric
06-02-2008 11:57 PM
Hi,
I found the problem for me. The Split-tunnel ACL was containing a network which was unknown... (a rest of configuration made for a test) I removed it and then everything was working fine again...
In fact, my customer didn't test the Anyconnect client since I've made this test...
So my advice : check your split tunnel ACL ^^, or just disable it for Anyconnect users and test if it's OK.
Good Luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide