04-03-2008 07:40 AM - edited 02-21-2020 03:39 PM
Hi,
I have a Cisco ASA and I am trying to get a Cisco 877 DSL router connected to it using the ASDM VPN wizard, but can't.
I have just had the 877 DSL router connect to my Cisco Concentrator and have simlpy changed the peer address on the router to now point to the ASA's external IP instead of the Concentrator. The Concentrator is good because I like it's real-time event viewer and it can tell me if the Concentrator is even seeing the connection attempt, but how can I dall this on the ASA?
Thanks
04-03-2008 10:43 AM
debug crypto isakmp
debug crypto ipsec
04-04-2008 04:16 AM
Can I do anything through the ASDM?
Plus how do I undebug those commands?
04-10-2008 01:46 PM
you can enable logging debug to the asdm and see the loggin messages on the asdm console. "un all" should stop the debug
04-10-2008 01:47 PM
you can enable logging debug to the asdm and see the loggin messages on the asdm console. "un all" should stop the debug
04-10-2008 01:49 PM
you can enable logging debug to the asdm and see the loggin messages on the asdm console. "un all" should stop the debug
04-11-2008 03:05 AM
Thanks, what's the best way to show the VPN's up via CLI?
04-11-2008 04:30 AM
show isa sa
- that will show the status of phase 1
show cry ipsec sa
- that will show the status of phase 2, as well as number of encrypted/decrypted packets
04-11-2008 05:12 AM
this command also help
show vpn-sessiondb detail l2l
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide