04-03-2008 01:02 PM - edited 03-15-2019 09:50 AM
Where would you find out the max number of participants you can have on a Meet Me call? Thanks!
Solved! Go to Solution.
04-03-2008 02:02 PM
under the service parameters for CUCM look for:
Maximum Meet me conference Unicast
that's the current max
HTH
javalenc
if this helps, please rate
04-03-2008 01:41 PM
Mike,
The maximum number of participants supported by a software conference is 128. However, if the IPVMS application is coresident with Callmanager, the maximum is 48. See the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmsys/a05confb.html#wp1035397
Hope this helps. If so, please rate the post.
Brandon
04-03-2008 01:48 PM
So what's the easiest way in basic terms to figure it out? Ha!!
Under conference bridges, we have 2 Software conference bridges and 8 hardware conference bridges through 2 6608 blades in 2 switches.
Thanks!
04-03-2008 02:02 PM
under the service parameters for CUCM look for:
Maximum Meet me conference Unicast
that's the current max
HTH
javalenc
if this helps, please rate
04-03-2008 02:24 PM
Currently set to 16. Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: