Pix 515 VPN issues

Answered Question
Apr 3rd, 2008
User Badges:

Hi,


We are trying to give remote client access to a server on inside interface. We have read alot of similare topics, but still is not working. Can someone please take a look at our configuration and let us know what we are doing wrong?


Our int are as follows:

outside = 204.222.162.0

inside = 192.168.1.1-254

DMZ = 204.222.161.0


Thanks



Correct Answer by husycisco about 9 years 3 months ago

Hi Stefanie,

Assuming that you have a VPN connection, as you mentioned in your topic title, a static would not solve the issue. Please attach your config.


Regards

Correct Answer by fortis123 about 9 years 3 months ago

Hi,


you need to have a static nat translation for the internal server.

static(inside,outside) netmask 255.255.255.255 0 0


Then create an access-list to allow access to the the host (public ip) with port..

ex:

access-list out_to_in permit tcp any host 1.1.1.1 eq telnet


Apply the ACL to outside interface.


hth

thank you

MS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
fortis123 Fri, 04/04/2008 - 09:27
User Badges:

Hi,


you need to have a static nat translation for the internal server.

static(inside,outside) netmask 255.255.255.255 0 0


Then create an access-list to allow access to the the host (public ip) with port..

ex:

access-list out_to_in permit tcp any host 1.1.1.1 eq telnet


Apply the ACL to outside interface.


hth

thank you

MS

Correct Answer
husycisco Fri, 04/04/2008 - 09:31
User Badges:
  • Gold, 750 points or more

Hi Stefanie,

Assuming that you have a VPN connection, as you mentioned in your topic title, a static would not solve the issue. Please attach your config.


Regards

Actions

This Discussion