cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1244
Views
0
Helpful
5
Replies

isdn cause code 0x84a9

whanson
Level 2
Level 2

has anyone had experience with this type of error.

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

if i recall correctly, that code belongs to temporary failure on the public network serving the remote user side

javalenc

HTH

java

if this helps, please rate

Did you find a resolution for getting this error?

Cause i = 0x84A9 - Temporary failure

I get this 30 seconds into leaving a voicemail.

maybe this?

Cisco Unity voicemails are cut off after 30 seconds

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K88174040

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

yiosepvaldes
Level 1
Level 1

hi,

anyone find answer help me with the same error but my scenario is something different.

the call flow where this happen is following: PSTN-GW(MGCP)-CUCM713-CUCM802-IPPHONE.

once a call comes in and goes through the gateway I get a tone reordering.

A re-order tone suggests you do not have "direct-inward-dial enabled" on your pots dial-peer so the router attempts to use two stage dialling

To resolve this, do the ff:

dial-peer voice 9999 pots

incoming called-number.

direct-inward-dial

Please rate all useful posts
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: