Jaime Valencia Thu, 04/03/2008 - 18:39
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

if i recall correctly, that code belongs to temporary failure on the public network serving the remote user side


javalenc

robray_sc Fri, 06/06/2008 - 12:08
User Badges:

Did you find a resolution for getting this error?


Cause i = 0x84A9 - Temporary failure


I get this 30 seconds into leaving a voicemail.

yiosepvaldes Wed, 05/16/2012 - 10:39
User Badges:

hi,

anyone find answer help me with the same error but my scenario is something different.

the call flow where this happen is following: PSTN-GW(MGCP)-CUCM713-CUCM802-IPPHONE.

once a call comes in and goes through the gateway I get a tone reordering.

Ayodeji Okanlawon Wed, 05/16/2012 - 14:41
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

A re-order tone suggests you do not have "direct-inward-dial enabled" on your pots dial-peer so the router attempts to use two stage dialling


To resolve this, do the ff:


dial-peer voice 9999 pots

incoming called-number.

direct-inward-dial

Actions

This Discussion