1300 bridge poor network performance

Unanswered Question
Apr 3rd, 2008
User Badges:

I currently have a building that connects to another building by 1300 bridges.They have been operational for about 2 years. Now all of the sudden the building that has the non-root bridge is experiencing poor network performance. The Non-Root Bridge Radio Interface currently shows 540154 Output Erros and 2204867 Packets Output. The Root Bridge Radio Interface currently shows 442442 Output errors and 2663530 Packets Output.

Thanks for any suggestions.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Thu, 04/03/2008 - 19:18
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Unless you have interference from some other link crossing yours, I would maybe check and test the cabling. You don't have external antennas connected to it do you?

Scott Fella Fri, 04/04/2008 - 04:27
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

The only thing you can do now is verify the cabling isn't corroded. Verify the bridge alignment and check for interference on the channel you currently are using. Changing the channel might help if it is interference. other than that, bridge could be going bad.

Actions

This Discussion

 

 

Trending Topics - Security & Network