Transcodes

Unanswered Question
Apr 4th, 2008
User Badges:

On cisco.com it is mentioned..


“Each DSP is individually configurable to support either conferencing or transcoding and standard voice Termination”


On a single DSP I can support either only transcoder or Conference or MTP ?? Am I right in my understanding.


On a 2821 I have


NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"

PID: PVDM2-64 , VID: V01 , SN: FOC112447TS


And on a 2811 I have


NAME: "PVDMII DSP SIMM with one DSP", DESCR: "PVDMII DSP SIMM with one DSP"

PID: PVDM2-16 , VID: V01 , SN: FOC11373FT.


Can anybody tell me the number of transcoding, conference and MTP sessions supported on each of two modules.


Moreover any helpful material regarding further understanding of Transcoders etc etc can be very assistive..


thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Fri, 04/04/2008 - 22:24
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html


Enhanced Transcoding and Conferencing for IOS Voice Gateways in a CallMananger Network using DSP Resources Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008084fe1f.shtml


1st link contains several tables on number of sessions and lots of information on the subject


HTH


javalenc


if this helps, please rate

Actions

This Discussion