IPsec Tunnel Private-to-Private network just goes one way

Unanswered Question
Apr 4th, 2008
User Badges:

Hi there!


First time Cisco setup for me, trying to setup a VPN between headquarters (peer 100.1.1.1, internal network 192.168.2.*) and a branch office (peer 200.1.1.1, internal network 192.168.1.*).


I followed this guide (minus the static NAT): http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml.


What works:

- pings work either way;

- http works either way;

- windows file sharing works either way;

What does not work:

- remote desktop works going from headquarters to branch office but not viceversa;

- ftp works only from headquarters to branch office but not viceversa.


Router configuration for both offices is attached. Any help is greatly appreciated. IPs are changed for security.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2 (1 ratings)
Loading.
istvanhoka Mon, 04/07/2008 - 06:44
User Badges:

After reading the suggested doc about fragmentation, I adjusted the both the MTU and TCP MSS to 1300. There was no change in the behaviour.


I am attaching the updated configurations.



Actions

This Discussion