How to limit ingress bandwidth on a Catalyst 2960

Unanswered Question
Apr 4th, 2008

Hi

I would like limit the ingress bandwidth of interface on a switch.

In the doc (2960 Config Guide for IOS 12.2(44)SE page 31-67), I found this command :

srr bandwidth limit X (with X between 10-90)

This work very well for egress traffic.

For a PC connected to the switch port, this command limit the download for the PC.

Because on the switch I have some Internet Web site, most of the traffic is ingress traffic (for the switch port) and I would like to control the bandwidth usage. For the server connected to the switch, most traffic is upload.

For example on a 100 Mbits port, I want to limit the bandwidth (so I want to limit the upload) to 13 Mbits/s

How can I do that ?

Regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Justin Brenton Fri, 04/04/2008 - 14:22

Hi aamsaleq,

Have you thought about using QOS. This is the best way to achieve proper prioritiy of traffic.

Regards,

Justin

Actions

This Discussion