WCS and migration don't work for me. Help

Unanswered Question
Apr 5th, 2008

I tried to use the upgrade from WCS byt keep getting this error.

Resuls from Autonomous AP Migration Reports:

START: Detailed logging started at -> 04.04.2008_19.55.50

INFO: Telnet to device done.

INFO: Privilege level is equal to 15.

INFO: Setting vty line completed.

INFO: Dumped Environmental variables.

INFO: AP is supported for Upgrade process

INFO: IOS version is greater than or equal to 12.3(7)JA.

INFO: AP has MIC installed already.

INFO: Station role is root.

INFO: Station role is root.

INFO: DNS and Domain name configured.

INFO: Mac address of device is 00:1d:a2:7f:77:e6

INFO: Completed Dot11Radio0 shutting.

INFO: Device set up done and time configured on device.

INFO: Run-config dumped.

INFO: AP is DHCP configured.

INFO: Hostname ap-b36-k03-002

INFO: Dumped Environmental variables.

INFO: Starts loading recovery image, takes time based on link speed.

ERROR: Device Response :: examining image...

%Error opening (Invalid IP address or hostname)archive download: takes 0 seconds

ERROR: Image Loading FAILURE.

INFO: Un-shut radio 1 done.

END: Migration Process Failure: Image Loading Failure.

It works fine with the Cisco upgrade software.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)


This Discussion



Trending Topics - Security & Network