04-05-2008 10:49 PM - edited 03-05-2019 10:13 PM
Hello,
I am trying to upgrade the IOS on my Cisco 871w. I have the enterprise IOS which required me to upgrade the flash. Well since I swapped out the flash the router is booting up to the ROMMON prompt. How do I get the new IOS on to the router?
Thanks,
Tim
04-06-2008 12:34 AM
Format the new flash and use the ROMMON tftpdnld command to download the new IOS image from a tftp server.
Essentially, you have to set the variables below and download via FE0, for example:
rommon 1 >IP_ADDRESS=192.168.1.10
rommon 2 >IP_SUBNET_MASK=255.255.255.0
rommon 3 >DEFAULT_GATEWAY=192.168.1.1
rommon 4 >TFTP_SERVER=192.168.1.20
rommon 5 >TFTP_FILE=c870-advipservicesk9-mz.124-15.T4.bin
rommon 6 >tftpdnld
Full instructions are at http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/rommon.html
04-06-2008 10:47 AM
rommon 2 > ip_address=192.168.10.200
rommon 3 > ip_subnet_mask=255.255.255.0
rommon 4 > default_gateway=192.168.10.1
rommon 5 > tftp_server=192.168.10.21
rommon 6 > tftp_file=c870-advipservicesk9-mz.124-15.XY2.bin
rommon 7 > tftpdnld
Missing or illegal ip address for variable IP_ADDRESS
Illegal IP address
I enter all the commands but I am still getting that error. Is there something else I need to do first? Like change the config register.
04-06-2008 11:24 AM
Tim
Try it again and this time put the commands into upper case rahter than lower case.
HTH
Rick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: