He Michel

I add it only to IPM not on other places in LMS

SNMP are ok

how to know if a device suport to be a source ?

System image file is "flash:c2800nm-ipbase-mz.123-11.T2.bin

Will add it now to LMS completelly

Gruss Steffen

Most devices can be a source, except some beyond end of life devices that might still be arround.

12.3T should be fine for most types of sources as the level of the SAA agent is >= 2.2.

For the source you need read and write community string as you want to program the device to do poll a responder.

Better use the devices center or management station to device view to check if communication works.

Cheers,

Michel

He Michel,

I have add it now completelly, I get the device detail report from device center I add also the right community string. Looks all is working without the IPM source issue

Gruss Steffen

Bitte Sehr,

I haven't tried to use IPM as a standalone application as I'm scared I might find myself entering credentials for many devices. Probably with as many typing errors on my part.

For me it has to come from the DCR. ;-)

I guess the problem here was the absence of the write community string as a source needs that, where a responder doesn't.

Cheers,

Michel

I add it to dcr check the credential over the job, nothing wrong ro and rw are ok, its not coming up in ipm automatically, so there must be a bug in ios, based I get it on all places in lms expect ipm.

Gruss Steffen

He Yjdabear,

hvt-3-buenosaires-01(config)#ip ?

Global IP configuration subcommands:

sap Global IP Multicast SAP Commands

security Specify system wide security information

source-route Process packets with source routing header options

source-track Source Tracker

subnet-zero Allow 'subnet zero' subnets

tacacs TACACS configuration commands

radius-server Modify RADIUS query parameters

random-detect-group Configure random-detect class

rbe Commands for Routing RFC 1483 Ethernet

encapsulated packets

regexp regexp commands

resume-string Define a host-specific resume string

rif Source-route RIF cache

rlogin Rlogin configuration commands

rmon Remote Monitoring

route-map Create route-map or enter route-map command mode

router Enable a routing process

Both commands are hvt-3-buenosaires-01(config)#rtr ?

% Unrecognized command

Looks like a bug.

Danke Gruss Steffen