old ACS appliance access

omar.elmohri · ‎04-07-2008

Hello everybody,

I have an ACS appliance 1111 installed on HP server. It's installed and I have to CD to make a recovery.

The server starts until arrive at the page where say that ACS i running and you can access via Serial or Browser.

I havn't the IP address to access and the Serial with standard parameters didn't show anything.

Please, anyone can help me how I access to manage this ACS ? I worked on it only on software version

umedryk · ‎04-14-2008

Without assigning the ip address it is not possible to Login into the ACS from remote.

To log on to the Cisco Secure ACS Appliance via a serial console, follow these steps:

Step 1 Establish a serial console connection to the Cisco Secure ACS Appliance. For details, see Establishing a Serial Console Connection.

Step 2 At the login: prompt, enter the Cisco Secure ACS Appliance administrator name.

Step 3 At the password: prompt, enter the Cisco Secure ACS Appliance password.

Result: The system prompt appears in the following form:

Cisco Secure ACS Appliance name

omar.elmohri · ‎04-16-2008

I'm agree with you, just that I don't have any reply on the serial port.