1410 native vlan Change

Answered Question
Apr 7th, 2008

I need to use vlans in a 1410 bridge environment an i need to change the default native vlan too. The question is: what happens to the BVI1 interface, since this one is associated with the native vlan?; is it automatically associated with the new native vlan?, will i need to create a new interface?, what about the connectivity? (this radio does not have a console port). I wolud like to make all changes via CLI.

I have this problem too.
0 votes
Correct Answer by drolemc about 8 years 8 months ago

You can configure multiple VLANs on the Wireless bridge using the GUI, you do not need CLI or console access to configure VLANs. Here is a good document which explains how to configure VLANs on Bridges.

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#vlanbr

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode