04-07-2008 12:28 PM - edited 03-15-2019 09:54 AM
I have two CME 4.0 boxes either end of a 2mb link. There is a SIP trunk configured between these units which works fine apart from some missing CLI info on the called party for the caller.
So if John Smith (x2002) calls Emily Bond (x3003), John will only see the xtn number for Emily, not her name. However Emily will see both name and number of who is calling her.
Any ideas greatly appreciated.
thanks
Jamie
Solved! Go to Solution.
04-08-2008 03:38 AM
Hi, that is "connected party name update". I would upgrade to IOS 12.4(11)XJ4 and it should be resolved.
Hope this helps, please rate post if it does!
04-08-2008 03:38 AM
Hi, that is "connected party name update". I would upgrade to IOS 12.4(11)XJ4 and it should be resolved.
Hope this helps, please rate post if it does!
04-11-2008 03:53 AM
Hi Paolo
Your advice worked a treat, updating to CME 4.1 has resolved the problem.
Thank you very much for your help.
best regards
Jamie
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide