I am having difficulties getting International Calls to go through. Does anyone have any clue to what would be preventing me from making those calls?
controller T1 0/0/0
channel-group 0 timeslots 1-24
controller T1 0/2/0
pri-group timeslots 1-24
vlan internal allocation policy ascending
isdn switch-type primary-ni
dial-peer cor custom
dial-peer cor list call-international
dial-peer cor list user-international
dial-peer voice 6 pots
description Outgoing Calls
dial-peer voice 5 pots
telcos and they're requests hehe
weird thing, i've configured that but if i strip the 011 i at least set the call as international but if that's what the telco expects let's give them that
drop the prefix command from the dial-peer and if you're using CUCM change the type under the GW or endpoint config to send them unknown and try again
if this helps, please rate
Hi, for your DP 5, the proper config config is wihtout any forward-digits command, and prefix 011 instead.
Another little know technique is:
this way, no prefix command is needed.
Hope this elps, please rate post if it does!