04-08-2008 03:54 AM - edited 03-15-2019 09:55 AM
Hi,
Is there a way to calculate bandwidth used purely by MGCP signaling over a WAN link.
Thanks
04-09-2008 11:29 AM
Hi Mohsin,
Cisco recommend for 50 users on a site that you have 12kbps (generally 250bps per device) for signaling. This is your CS3 traffic.
As for voice bearer (ie the conversation) - you need 80kbps for a G711 call or 24kbps for a G729 call - this is marked EF.
04-09-2008 03:45 PM
Which document from cisco contains this information?
04-09-2008 03:46 PM
Which document from cisco contains this information?
04-09-2008 10:19 PM
Look for the QoS SRND guides here:
http://www.cisco.com/en/US/netsol/ns656/networking_solutions_design_guidances_list.html#anchor12
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: