cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
792
Views
5
Helpful
3
Replies

PIX Crash

mario.tello
Level 1
Level 1

Hi Tom

I have a problem with a PIX 515 is constantly rebooting. I suppose that it's happening when runs the PIX Garbage Collector processes. Do you now what is the reason that this processes make the PIX crash and reboot?

PIX 515

Cisco PIX Firewall Version 6.3(1)

Cisco PIX Device Manager Version 3.0(1)

This is the out of show crashinfo command:

Thread Name: PIX Garbage Collector (Old pc 0x002e0c1c ebp 0x00d1c6a8)

Show processes command:

H* 002e0c1c 0009ff2c 0054dff0 0 00d1b724 1812/4096 PIX Garbage Collector

That's is happening when the PIX Garbage Collector is currently in use.

Thanks a lot

Regards,

Mario

3 Replies 3

JORGE RODRIGUEZ
Level 10
Level 10

Mario, it seems your PIX is hitting bug ID: CSCec19113 , if you have access to bug tools take a look at it, bug was reported in code 6.3(2), your code is 6.3(1) so most likely your code has this bug even if it was first reported in 6.3(2) first. See if the work around resolves your issue, if not then I would suggest to plan upgrading to the latest code in the 6.x train which is 6.3(5) as the most stable code in 6.x.

PIX crash in thread PIX Garbage Collector in pix_gc

Symptom:

PIX reloads in PIX during garbage collection

Conditions:

When H323 fixup is enabled.

Workaround:

Disable the H323 fixup.

Further Problem Description:

During processing H225 message, it's possible that the

process might be suspended because of printing syslog

messages, and while suspending, the h225 connection that

is associated to the H225 message has timed out causing

the H225 internal data structure to be chunk-freed. Then

the process resums and at the end of the H225 processing

the H225 internal data structure is chunk-freed again.

Having a chunk freed twice causes the chunk to be allocated

and enqueue to the Garbage Collector queue twice at later

time, which in turn, causes corruption in the Garbage Collector

queue resulting in crash.

1st Found-In

6.3(2)

Fixed-In

6.3(3.112)

6.3(4.0)

Component(s)

pix-app

Regression

N

HTH

Rgds

Jorge

Jorge Rodriguez

Hi Jorge

I already disable the fixup h323, let me try upgrading the code to 6.3(5).

no fixup protocol h323 h225 1720

Regards,

Mario

Hi Mario, when you say already disable the fixup h323 was it already disabled when the crashes happened? in any case, the upgrade should not be that bad, and you know it backup config prior upgrade as well as your running activation keys to be on the safe side etc..

Bst Rgds

Jorge

Jorge Rodriguez
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card