04-09-2008 06:13 AM
We configured a client on ACS 3.3 to access the 3560 using ssh. Now i want to use LMS to make config changes, download software, etc. I created an account on ACS & edited the device credentials in the device center but, can't download ios using rme 4.05. Any help would be appreciated?
thanks,
04-09-2008 08:53 AM
You will need to go to RME > Admin > Software Mgmt > View/Edit Preferences, and check the enable SSH box. Then, RME will use SSH when it needs to work interactively with a device. For a 3560, RME will log into the device either via telnet or SSH (based on that checkbox), then perform a copy on the switch.
04-09-2008 10:25 AM
I tried that & it still won't work. I'm not sure what is missing.
04-09-2008 10:59 PM
You will need to enable SoftwareManagement debugging under RME > Admin > System Preferences > Loglevel Settings. Then re-run your job. The job directory under NMSROOT\files\rme\jobs\swim will have the details as to what is going wrong.
04-24-2008 03:18 AM
04-24-2008 08:36 AM
According to this, SSH authentication is failing. Make sure you have configured the same username and password configured for this device in DCR. Note: where as telnet can be successfully authenticated with a password alone, SSH requires both a username and a password.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide