How can I receive fax Store and Forward and Voice calls on the same gateway

Unanswered Question
Apr 9th, 2008
User Badges:
  • Silver, 250 points or more

just configuring FAX store and forward on one of my voice gateways

but I can only receive voice calls or FAX store and forward calls, depending on my inward call dial peers I thought having 2 dial peers thecall would drop through to the second one but it doesnot.

here are the dial peers

dial-peer voice 2111 pots

service onramp

incoming called-number .

dnis-map faxnumbers


port 2/0:15

dial-peer voice 1001 pots

service Default

prefer 1

incoming called-number .


port 2/0:15

is there a way round this ? or do i have to use the fax detect TCL?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Richard Bradfield Thu, 04/10/2008 - 20:30
User Badges:
  • Silver, 250 points or more

Answer my own question

I was trying to match the called number to the number after the num-exp command had taken place, on doing a 'debug voice dialpeer'

i found infact for inbound dial peers the match on the incoming called number is done before the num-exp takes place,

now works as it should.



This Discussion