NAT in Cisco 3750 Switch

Unanswered Question
Apr 9th, 2008
User Badges:

Hi,


I have a peculiar question.That,I have Cisco3750 switch,in which I have created 3 VLANs,named VLAN10,VLAN20 and VLAN 30


Thne in VLAN 10,I have a server with the static IP address in that VLAN subnet,then I have configured VLAN interface 10,20 and 30 for inter VLAN communication.(By enabling the IP routing)


My requirement is the server which is in VLAN 10 has to be natted to VLAN 20 and VLAN 30 Is it possible?Basically a static NATTING.....


Please hep me.


My guess: Basically a VLAN interface is a virtual,it is not a physical,in that case static natting may not be possible.


If it is a physical port,atleast we could convert it as a ROUTED PORT,then atleast we can use the IP NAT inside etc...



Thanks and Regards,


S.Venkataraman.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
samuelpetrescu Thu, 05/20/2010 - 04:51
User Badges:

Sorry, Cisco 3750 switches doesn’t support NAT

at all, and is no planning for NAT support.



Ganesh Hariharan Thu, 05/20/2010 - 21:49
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi,


I have a peculiar question.That,I have Cisco3750 switch,in which I have created 3 VLANs,named VLAN10,VLAN20 and VLAN 30


Thne in VLAN 10,I have a server with the static IP address in that VLAN subnet,then I have configured VLAN interface 10,20 and 30 for inter VLAN communication.(By enabling the IP routing)


My requirement is the server which is in VLAN 10 has to be natted to VLAN 20 and VLAN 30 Is it possible?Basically a static NATTING.....


Please hep me.


My guess: Basically a VLAN interface is a virtual,it is not a physical,in that case static natting may not be possible.


If it is a physical port,atleast we could convert it as a ROUTED PORT,then atleast we can use the IP NAT inside etc...



Thanks and Regards,


S.Venkataraman.


Hi S.Venkataraman,


Check out the below link with switches details which support NAT Feature Support on Catalyst Switches


http://www.cisco.or.at/en/US/tech/tk648/tk361/technologies_tech_note09186a008011c629.shtml


Hope to Help !!


Ganesh.H


Remember to rate the helpful post

Actions

This Discussion