04-10-2008 01:36 AM - last edited on 03-25-2019 07:40 PM by ciscomoderator
i would like to specification enable a ext number (5050) to go straight to voicemail after 6:00pm, Saturday & Sunday.
What should i do to accomplish this requirement?
Thanks
04-10-2008 04:12 AM
Essentially you will make schedules and partitions and route to those partitions based on the schedule you create.
Here is a good link to get you started.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_2/ccmsys/a03tod.html
04-10-2008 04:24 AM
after i created all necessary Time Period, Time Schedule, Partition and Calling Search Space. How it will auto redirect the call to voicemail instead of hearing ringing tone at calling party ?
04-10-2008 04:28 AM
If configured correctly it will done based on your TOD schedule. If you have it set for after 6 P.M. on Saturday and Sunday to route to VM then that's what it will do.
04-10-2008 04:28 AM
Hi Chee,
Just to add a note to the good info from Matt (5 points for your recent contributions here Matt :)
Check out this this excellent presentation on Time of Day Routing supplied recently by Tom (it includes a great step by step and examples);
http://www.cisco.com/E-Learning/bulk/public/celc/CMToD/player.html
Hope this helps!
Rob
04-10-2008 04:36 AM
Rob, once again you have contributed some extremely valuable information here. 5 Points!! Are there any other tutorials such as the one you have posted? These are very well made and would help enormously to learn about those technologies I have yet to implement.
Thanks Again!
04-10-2008 04:42 AM
This is a fantastic video !!!
thanks a lot for providing this link to us.
hope i can learn something valuable from the video.
04-10-2008 05:01 AM
Hey Matt,
Thanks so much for your very kind words :) There are some pretty good similar Training topics here;
Cisco Learning Connection
Voice and Unified Communications
http://www.cisco.com/web/learning/le31/le46/products/products-voice-ip-communications.html
Hope this helps!
Rob
04-10-2008 05:32 AM
From what my understanding..
1)create time period(s).
2)create time schedule.
3)associate time period(s) to time schedule.
4)create a partition (if don't have any)
5)associate time schedule in the partition.
6)And finally, assign partition to a DN.
is this the correct configuration process ?
correct me if i'm wrong.
Thanks
Allen
04-10-2008 07:40 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: