Cannot make outgoing calls

Steellllllllll0 · ‎04-10-2008

Hi All,

Hoping someone can help me out.I am unable to make any outgoing calls.I have 3 BRI circuits,checked CCM and digits are being matched,call is just not being completed.See attachment :

Thanks !!

paolo bevilacqua · ‎04-10-2008

replied in the other thread, do you berar capability speech somewhere ? if so remove it.

Then I don't know what number are you tryin to call, 0054 would be international to argentina, but then the following number is wrong.

Steellllllllll0 · ‎04-10-2008

I dont have bearer capability speech anywhere in my config.I am dialling 0 for outside line and then a local number beginning with 0.

Steellllllllll0 · ‎04-10-2008

I am also getting this message in debug output:

Progress Ind i = 0x8183 - Origination address is non-ISDN

paolo bevilacqua · ‎04-10-2008

PI is not a problem. What you send out depends on the destination-pattern, then if you have "no strip-digits" or "forward-digits all" it will send out the additional 0 and the call fails.