04-10-2008 03:58 AM - edited 07-03-2021 03:41 PM
Hello,
we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).
Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?
Best Regards,
Thorsten
04-10-2008 04:31 AM
Don't know if you call it a summary, but if you run a show run-config or show running-config on the wlc cli, the ap information is in one of those. You then can paste that to notepad or word and do a find
04-10-2008 05:21 AM
Hello,
I tested it but did not get the output I am looking for.
What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:
wlan profile 1
ap1
ap2
ap3
wlan profile 2
ap2
ap5
ap7
...
Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?
Regards,
Thorsten
04-10-2008 07:34 AM
Try config paging enable | disable
04-10-2008 06:47 AM
If you have WCS, this can be done under the reporting function
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: