Call Forward from 0 to different numbers

Unanswered Question

I need to find a way to enable callers to 0 out of the Greeting message and then have a number called, then if that number does not pickup the next number is called and so forth until we are at the end of an escalation list.


I can 0 out and send to one number but then that numbers line settings takes over.


Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jaime Valencia Thu, 04/10/2008 - 09:04
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

have you tried sending the 0-out to a hunt pilot that's associated to a line group of the phones you want to ring??


or to a pilot point if using AC?


HTH


javalenc


if this helps, please rate

Jaime Valencia Thu, 04/10/2008 - 11:56
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

reset the hunt list a couple of times, that usually makes it register


HTH


javalenc


if this helps, please rate

Rob Huffman Fri, 04/11/2008 - 04:45
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hey Jaime,


Nice thinking on this one :) I was trying to wrap my head around this for a bit and you nailed it! 5 points from this end.


Take care,

Rob

Actions

This Discussion