MCS-7815-I1-CC2/IPC3 at 2,5Ghz instead of 3,06Ghz

Unanswered Question
Apr 10th, 2008
User Badges:


I've got a MCS-7815-I1-CC2/IPC3 IBM 306 Platform, boot at 2,5Ghz instead of 3,06Ghz.

I have CCM version 4.2.3 and I want to upgrade to 6.1 but verification hardware failed due to speed cpu.

- I have upgraded bios with last firmware from IBM : without success.

- I have open the cover to see if there are jumpers : no success.

- I want to change cpu setting on bios

(Advanced Processor Options) : impossible.

How to change theses settings ?

Best regards.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gogasca Thu, 04/10/2008 - 21:30
User Badges:
  • Green, 3000 points or more

This sounds like a problem with the bus on the system board. I have seen replacing it resolve this issue before

DWAM_2 Fri, 04/11/2008 - 00:12
User Badges:

Thank You for you answer.

I just have another question : what is the original frequency of the RAM on this type of server? I've remarked that I've got PC2700 (DDR 333) on the server and I think that it sells with PC3200 (DDR 400) ?!

Can you confirm this ?

Thank you.


This Discussion