someone you can help me?
I have a problem of rules with a cme 4.1
I have an incoming line abiltata to the two figures as extension incoming sull - while internally I am having three figures
the problem and that in entry everything works but in exit I don't succeed in making to visualize the complete number with the number the inside but only the root
here following I send you the configuration that I have performed:
voice translation-rule 50
rule 1 / ^ \ (. * \) / / \1 / type unknown unknown
rule 2 / ^ \ (. * \) / /0\1 / type national national
rule 3 / ^ \ (. * \) / /00\1 / type international international
voice translation-rule 51
rule 1 / ^5 \ (.. \) / /3989005\1 /
voice translation-profile coming
translate calling 50
voice translation-profile outgoing
translate calling 51
translation-profile incoming coming
Looks like you have not: applied yet "coming" (che significa "venendo" :).
Then check with "debug isdn q931" and "term mon" the number you are sending out. Sometime, TI makes impossible to send out DID outgoing even if you have it working incoming.
Note: your rule 50 can be rewritten more concisely as:
rule 2 // /0/ type national national
rule 3 // /00/ type international international
and similarly 51
rule 1 /^5/ /3989005/