04-11-2008 06:17 AM - edited 03-13-2019 05:09 PM
hi guys
I have a problem in the configuration of the voices translation-rule
can someone help me?
my problem and that I have a line in entry (PRI) with did to two digit and internally I have three digit 5xx while the external number is actually 3989005xx to here nesun problem for the operation.
But I don't succeed in making to visualize the whole number in exit included theinside number
on the debug isdn is proposed the whole number, but I don't understand because is not visualized.
I have planned this configuration but not sò if it is correct
!
voice translation-rule 50
rule 1 / ^ \ (. * \) / / \1 / type unknown unknown
rule 2 / ^ \ (. * \) / /0\1 / type national national
rule 3 / ^ \ (. * \) / /00\1 / type international international
!
voice translation-rule 51
rule 1 / ^5 \ (.. \) / /3989005\1 /
!
voice incoming translation-profile
translate calling 50
!
voice translation-profile uscenti
translate calling 51
!
voice-port 0/0/0:15
translation-profile incoming entranti
local-alerting
cptone IT
bearer-cap Speech
!
dial-peer voice 20 potses
translation-profile outgoing uscenti
destination-pattern 0.T
port 0/0/0:15
!
dial-peer voice 10 potses
translation-profile incoming insert-zero
incoming called-number 3989005..
direct-inward-dial
no register e164
!
Solved! Go to Solution.
04-11-2008 10:25 AM
Hi,
You have asked this question already, beside for many would be hard to understand "nesun problem" :)
Check that sometime TI doesn't allow outgoig DID and you have to request they do.
04-11-2008 10:25 AM
Hi,
You have asked this question already, beside for many would be hard to understand "nesun problem" :)
Check that sometime TI doesn't allow outgoig DID and you have to request they do.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide