cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
796
Views
0
Helpful
4
Replies

LMS 3 installation issue solaris10

ebezombes
Level 1
Level 1

Hi,

Customer has error messages during LMS 3 installation, here some examples:

INFO: Copying to /opt/CSCOpx/www/classpath/com/cisco/nm/xms/psu//adpaters/lmsportal/

ld.so.1: perl: fatal: libstdc++.so.3: open failed: No such file or directory

Killed

ERROR: attribute verification of </opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties> failed

pathname does not exist

ERROR: attribute verification of </opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script> failed

pathname does not exist

Thanks,

4 Replies 4

Joe Clarke
Cisco Employee
Cisco Employee

It sounds like Common Services did not install properly. Was a previous installation aborted?

At this point, you should uninstall what you have, then start from scratch. Make sure you have a recent Solaris 10 patch cluster loaded. I know August 07 or later works very well. Then reinstall from a locally attached DVD drive.

Hi,

Do you think that clean_system.sh scritp works with LMS 3.0.1 ? So, I can ask to the customer to try it.

Yes, clean_system.sh will work with LMS 3.0, but it will miss the CWA directory under /etc. Be sure to remove /etc/opsxml when clean_system.sh is done.

In fact, customer install LMS with a home script which works with expect command. Installation fails because home script fails!

Now that's ok.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco