ASA 5505 VPN RA help

Unanswered Question

Trying to configure remote access via Preshared secret..VPN client connects fine, but I am unable to connect to the internal LAN. When I turn on logging it is complaining that I have no translation rule outside interface to internal LAN. I have tried bypassing NAT via NAT 0 and ACL but no success.

Any ideas ??

Thanks Dave

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
srue Sun, 04/13/2008 - 15:28
User Badges:
  • Blue, 1500 points or more

so your nat 0 statement/acl has your LAN network range for the source address and your vpn client address range for the destination part?

is sysopt connection permit-vpn/ipsec turned on?

(sh run sysopt)

if not, is your outside-to-inside ACL allowing access from the remote access address range?


This Discussion