04-12-2008 10:40 PM - edited 03-03-2019 09:31 PM
Dears ,
I have Faced the following message on router that keeps appearing till i restarted the router : %HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was n
ot detected for Interface Descriptor Block 0x42ED6600
FastEthernet0/1/0: hwic_host_error_handler: Error Event Register = 0x20, IDB = 0
x42ED6600.
what is the reason of that .
04-13-2008 01:30 AM
Which exact IOS are you running ?
04-13-2008 02:12 AM
Model 2800 , Version 12.4(3d)
04-13-2008 01:01 PM
Can you upgrade to 12.4(3j) and check again.
04-13-2008 04:44 PM
Hi, your router may have a bug in the IOS, the closk signal was not detected on the interface. have a look at the Cisco error message decoder, yes you most likely looking at a IOS upgrade.
HTH
Select Software: All Supported Software
suggest related documents within results
Showing 1-1 of 1 results Page: 1
1. %HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block [hex]
The host termination logic has encountered a fatal error. The logic could not detect the HWIC receive clock for the interface specified by the IDB. This condition indicates a software error.
Recommended Action: Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Related documents- No specific documents apply to this error message.
04-13-2008 09:04 PM
Hi,
As per Donald Williams's post please open a TAC case. The same also found at cisco site.
%HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block [hex]
The host termination logic has encountered a fatal error. The logic could not detect the HWIC receive clock for the interface specified by the IDB. This condition indicates a software error.
Thanks
Goutam
12-29-2008 06:06 AM
I am experiencing the same problem:
%HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block 0x4554B754 FIO ext. events 0x00000014
FastEthernet0/1/0: hwic_host_error_handler: Error Event Register = 0x20, IDB = 0x4554B754
%HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block 0x4554B754 FIO ext. events 0x00000014
FastEthernet0/1/0: hwic_host_error_handler: Error Event Register = 0x20, IDB = 0x4554B754
%HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block 0x4554B754 FIO ext. events 0x00000014
FastEthernet0/1/0: hwic_host_error_handler: Error Event Register = 0x20, IDB = 0x4554B754
%HWIC_HOST-1-RXCLK_MISSING_ERROR: HWIC_HOST: The HWIC Receive Clock signal was not detected for Interface Descriptor Block 0x4554B754 FIO ext. events 0x00000014
On 2811 with HWIC-9ESW-POE card installed.
What was the IOS fix for this or am I having a H?W problem, because this router has been running for months with the same IOS version, which is
03-12-2018 10:07 AM
MOst of the time i experience this issue is when the HWIC card is faulty caused by electrical shock or hit by the lightning...Most on the ADSL HWIC.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: