C2821-25UC/K9

Unanswered Question
Apr 14th, 2008

Im using the Dynamic Configuration Tool.

Im configuring aditional three vic2-4fxo to the c2821-25uc/k9.

I dont know why the application show me a warning when a select the PVDM2-32U48=.

But if I select the PVDM2-48= instead PVDM2-32U48 everithing is ok.

What is the difference to use PVDM2-32U48= or PVDM2-48= with C2821-25UC/K9 with three vic2-4fxo cards.

Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rafael Jimenez Mon, 04/14/2008 - 11:24

PVDM2-32U48 is

PVDM2 32-channel to 48-channel FACTORY UPGRADE,

while the PVDM2-32U48 has a price list of USD 750, the price list for PVDM2-48= is USD 2400.

rob.huffman Mon, 04/14/2008 - 12:49

Hi Rafael,

I see :) In this case you would have to be puchasing a "bundled" package that included in it's price a PVDM2-32. For an extra $750 you could ask for the upgrade to a PVDM2-64. This sadly, cannot be ordered except in a "bundled" package :(

Here is an example;

Table 22 48-User Office - Single Site (Cisco 2821 Integrated Services Router)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bcs/testcase/reference/guide/whitebom.html

Hope this helps!

Rob

Actions

This Discussion