cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
3
Replies

C2821-25UC/K9

Rafael Jimenez
Level 4
Level 4

Im using the Dynamic Configuration Tool.

Im configuring aditional three vic2-4fxo to the c2821-25uc/k9.

I dont know why the application show me a warning when a select the PVDM2-32U48=.

But if I select the PVDM2-48= instead PVDM2-32U48 everithing is ok.

What is the difference to use PVDM2-32U48= or PVDM2-48= with C2821-25UC/K9 with three vic2-4fxo cards.

Thanks.

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Rafael,

I have never seen the part # PVDM2-32U48= but you will be fine with the PVDM2-48= on a 2821 :)

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd8016e845_ps3115_Products_Data_Sheet.html

Hope this helps!

Rob

PVDM2-32U48 is

PVDM2 32-channel to 48-channel FACTORY UPGRADE,

while the PVDM2-32U48 has a price list of USD 750, the price list for PVDM2-48= is USD 2400.

Hi Rafael,

I see :) In this case you would have to be puchasing a "bundled" package that included in it's price a PVDM2-32. For an extra $750 you could ask for the upgrade to a PVDM2-64. This sadly, cannot be ordered except in a "bundled" package :(

Here is an example;

Table 22 48-User Office - Single Site (Cisco 2821 Integrated Services Router)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bcs/testcase/reference/guide/whitebom.html

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: