i have configured my ASA 5510 with 2 same level security interfaces, i have "Same-security-Traffic permit inter-interface" enabled on the asa, but no traffic either interfaces is passing to the other interface. I know this is an Access list problem but i can not find any commands to allow all traffic to pass freely between the 2 interfaces.
Any help is greatly needed.
You've already got
access-list inside_Nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 22.214.171.124 255.255.255.0
but what you are missing is...
nat (inside) 0 access-list inside_Nat0_outbound
That should work the same as that static command mentioned before.
The only other thing I see which may be an issue is whether or not the MCI interface will be able to route back to 172.16.0.0 via 126.96.36.199. You may have to do something other than nat exemption if that is the case. Something like...
no global (MCI) 100 interface
global (MCI) 101 interface