Install CCA in HP DL140 G3

Unanswered Question
Apr 14th, 2008
User Badges:

Hi,

I am try to install CCA Manager and Server 4.1.1 in a Server HP Proliant DL140 G3. The first time I put enter and I lose the keyborad and mouse. After that I found a bug (CSCsg98960) and the solution was to put "DL140" and after enter. OK now I have Keybord and mouse but the following error occurer "An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of the problem"

Does anyone had the same issue?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Mon, 04/21/2008 - 05:59
User Badges:
  • Silver, 250 points or more

Upgrades to 4.1(1) from previous versions are not affected by this bug.


Workaround

At the boot prompt that appears during installation, enter "DL140" and then .

Cisco Clean Access Installer (C) 2006 Cisco Systems, Inc.

Welcome to the Cisco Clean Access Installer!

- To install a Cisco Clean Access device, press the

key.

- To install a Cisco Clean Access device over a serial

console, enter serial at the boot prompt and press the

key.

boot: DL140

http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/411/411rn.html

DANIEL FERREIRA Mon, 04/21/2008 - 06:14
User Badges:

Hello,


I put DL140 and the keybord issue was solved, but another error occurs - "An error has occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of the problem"

Actions

This Discussion